C310 WATERPROOF COMBAT TROUSERS

C310 WATERPROOF TROUSERS

Fully waterproof and breathable with a light-but-strong seam-sealed inner dropliner. The outer layer is our signature 50/50 ripstop coated with a DRW finish, one of the toughest fabrics on the market.

SKU: C310
Fabric: 50/50 Ripstop Outer 100% Polyester Dropliner
Waist Sizes: 28W - 50W
Leg Lengths: 29L, 31L, 33L, 35L
Colours: View the Arktis Range
(Please note MOQ's, prices & availability vary between camos/ colours)
Category: Trousers & Shorts

WATERPROOF

RIPSTOP

WINDPROOF

BREATHABLE

BUY RETAIL
TRADE - CONTACT US
The C310 is the fully waterproof version of our classic combat trousers. The outer is made from our signature 50/50 ripstop is coated with a DRW finish and is one of the toughest fabrics on the market.
The waterproof/breathable characteristic is achieved by a light-but-strong seam-sealed inner dropliner. By having the critical performance fabric shielded by the outer shell, any nicks or tears that might occur during wear and tear mean that the garment will remain waterproof/breathable despite damage to the outer shell.
The C310 features an adjustable waistband which allows 1-2 inches of adjustment either way without the need for any addition belt systems. Two leg pockets, two rear pockets, two hand pockets, adjustable ankle and a fly zip opening. This trouser has seen action with a number of forces around the world. The Dutch military, UK police, and French special forces actively buy this trouser from us for its extreme reliability and performance.
  • 50/50 Polycotton showerproof Ripstop - No Melt/ No Drip
  • Waterproof dropliner with taped seams
  • Adjustable waist and ankles
  • Heavy-duty nylon stitching
  • Durable zips
  • Key points of wear bartacked
  • Adjustable drawcord on ankles
  • Four large front boxed pockets
  • Patch notebook pocket with pen pouch
  • Large slide buttons bound in

Trousers - How To Measure

Measure your waist size and inside leg. Compare to the sizing table below.

Size 28W 30W 32W 34W 36W 38W 40W 42W 44W
Wearers Waist Size 69-74 74-79 79-84 84-89 89-94 94-99 99-104 104-109 109-112

Size 28W 30W 32W 34W 36W 38W 40W 42W 44W
Wearers Waist Size 27-29 29-31 31-33 33-35 35-37 37-39 39-41 41-43 43-45

INSIDE LEG MEASUREMENTS
INCHES CM EQUIVALENT
29L 74 SHORT
31L 79 REGULAR
33L 84 LONG
35L 89 EXTRA LONG

Our ripstop clothing is made from robust, hardy fabric that lasts for years. All dyes will tend to fade, but ours has an excellent colour fixative that will remain effective for years. The basic principle of care is to be sensible. Heavy reactive chemicals will strip the fabric, and overly gentle treatments will not be particularly effective. Be sensible. The thing to remember is that general wear and tear comes in many forms, not just abrasion. Strong light has a powerful effect (photodegradation), and there are even chemical compounds in rainwater, so generally everything you use can be expected to deteriorate. Arktis fabrics have been developed with these characteristics in mind. Making them durable and resistant to wear and tear. Most caring involves being thoughtful about what you do.

Washing: Ripstop & Nylon Minirip: For light marks and dirt, use a wet cloth to wipe down your garment. For more serious cleaning, you can place your Arktis garments in the washing machine with minimal issues. Wash at 30°C using a non-bio cleaner. Do not use softeners or bleach. Leave to dry in a warm ventilated room, do not tumble dry. Whilst our ripstop has resistance to dry cleaning, chemicals are used in the production of coatings such as DWR. These chemicals can react with dry cleaning chemicals, so we recommend that you do not use this method.

Reproofing: A time will come in the life of a waterproof garment when you notice that you are still dry but that the outer garment is becoming waterlogged and heavy. A modest restoration of the outer’s water repellency could help solve this problem – not to make it waterproof but to diminish the absorption of water into the outer fabric. With some coated fabrics, pressing the garment with a cool or “1 Dot” iron will revive the coating to an effective level. The reason behind this is that heat can reactivate the finish, bringing it back to life. It’s always worth trying ironing as the first step. If required you can restore outer water repellency using Stormsure, NIKWAX or similar products. We prefer spray-on type products to allow for precision on key areas. When spraying make sure the garment is clean and free from any detergent, focus on areas such as shoulders and hoods.